Tube Layout

Calculate cut lengths and bend marks using "Apex-to-Apex" blueprint dimensions. Assumes a rotary draw bender (marking the start of the bend).

Bend Sequence
# Dist to Apex Bend Angle° Rotation°
in
Ready to Calculate

Add your bend dimensions and calculate to generate the cut sheet.

Total Cut Length (Developed)
0.000
in
Bender Marking Sheet
Bend Mark Dist (from start) Bend Angle Rotation (Twist)
Instructions: Measure all marks continuously from the SAME end of the tube. Place the mark exactly on the "Start of Bend" die alignment edge. Ensure the tube is rotated to the correct angle before pulling the bend.
Left Click: Rotate Right Click: Pan Scroll: Zoom